Unipulse F325 Operation Manual Download Page 136

Page: 136 / 160

125

Options

125

Options

Chapter

■

Communication type

- Mode = 0: Command

Communication is commanded from the host computer.
(Indicated value will not be automatically transmitted.)
Terminators can be selected from CR or CR+LF.

- Mode = 1: Continuous

Message in UNI-Format is continuously transmitted.
R, W, and C commands are ignored.

Format 1: status, indicated value linked

Format 2: status, indicated value linked, indicated value not linked

Format 3: status, indicated value linked

* Outputs of HH limit and LL limit are excluded from Format 1.

- Mode = 2: Printed

Message in the UNI-Format is transmitted when printing is performed.

Format 1: status, indicated value linked

Format 2: status, indicated value linked, indicated value not linked

Format 3: status, indicated value linked

* Outputs of HH limit and LL limit are excluded from Format 1.

Transmitting format 1

(21 or 22-byte)

Transmitting format 2

(24-byte)

Transmitting format 3

(19 or 20-byte)

Transmitting format 1

(21 or 22-byte)

Transmitting format 2

(24-byte)

Transmitting format 3

(19 or 20-byte)

Refer to P.132 “

■

Continuous transmitting format” for transmitting specifications.

Attention

Summary of Contents for F325

































































































































































Search results

Summary of Contents for F325

Reviews:

Related manuals for F325

Brands by name

Popular brands

Unipulse F325, Operation Manual

Search results

Summary of Contents for F325

Reviews:

Related manuals for F325

Brands by name

Popular brands