9.INSTALLATION
24
3. Add an end cover to the right most unit.
9-2. DIN Rail Installation
CJ series can only be mounted to DIN type rail. It can no be installed using screws.
1.
Set the DIN rail pins on the rear of the unit to “Released” position.
2.
Hook the CJ unit’s upper protrusions on the DIN rail (
①
), and engage the entire
notch to the rail (
②
).
End cover
CAUTION
You must install an end cover to the right most units. Without it, CJ1’s CPU unit issues
“I/O bus error” (Operation Halt Error) and will not start operation (neithre “operation”
nor “monitoring” mode).
DIN rail pin
Released” position
DIN
1
2
DIN rail
