19
MAX RANGE SETUP
If UniTire is set to operate in analog mode, it is
necessary to set the
maximum pressure value
used on the scale. By setting the maximum
range, the analog scale can be made much
easier to read with much smaller resolution.
Always set the maximum range as low as pos-
sible. It does not matter if the maximum range
is exceeded. UniTire can still measure all the
way to 5 bar.
“MAX RANGE” is use to set the maximum
pressure value on the analog scale. Adjust the
value with the
left
button ( ). To start at the
lowest value, press the
right
button a little
longer (
1
). When finished just press the
right
button ( ) to store the value and move to the
next setup screen.
STEAlTH MODE SETUP
UniTire can display two different sequence
screen. One is using text and a visible pressure
value. The other is called “stealth mode” and
it will not show the actual pressure value, but
instead guide you to the right, preselected
pressure value.
“STEAlTH MODE” is use to turn on this special
stealth mode. Use the
left
button ( ) to select
between yes and no and press the right button
to store the setting and move on to the next
screen.
STEAlTH TARGET SETUP
When stealth mode is enabled, 2 or 4 mo
re
screens are shown.
This is the hidden pressure targets for each
tire. The value will not be shown in stealth
mode, but UniTire will show you when you
have the right pressure in the tire. Set the tar-
get value with the
left
button ( ). If you keep
pressing the
left
button (
3
), the increase of
the value will go faster. To start from zero,
press the
right
button a little longer (
1
).
Setup mode
R e f e r e n c e
G u i d e
Summary of Contents for UniTire
Page 1: ...UniTire Pressure Gauge User Guide...
Page 8: ...8 I n t r o d u c t i o n Examples...
Page 22: ...22...
