20
R e f e r e n c e
G u i d e
Setup mode
STEALTH OFFSET SETUP
When stealth mode is enabled, it is possible to
offset the value shown in Pressure mode.
Increase the offset value by pressing the
left
button ( ). If you keep pressing the
left
button (
3
), the increase of the value will go
faster.
To change between increasing and decreasing,
just press the
left
button a little longer (
1
).
The direction is indicated by the small arrow.
To start from zero, press the
right
button a
little longer (
1
).
Select and move to next setup screen by press-
ing the
right
button ( ).
LANGUAGE SETUP
UniTire supports a lot of different languages.
The name of each language is always the same
three letters - no matter which language you
choose. You can press the
right
button a little
longer (
1
) to select English language.
Scroll through the choices with the
left
but-
ton ( ). Select and move on to the next setup
screen by pressing the
right
button ( ).
CONTRAST SETUP
Here you can set the screen contrast - that is
the contrast between the screen and the text /
numbers on the screen.
The contrast can be set to a value between
-5 and +5. Increase the contrast by pressing
the left button ( ). You will see the contrast
change at the same time.
To reset the contrast to zero, press the
right
button a little longer (
1
).
Save and move on by pressing the
right
button ( ).
PRESSURE UNIT SETUP
Select between commonly used pressure units.
Scroll between the choices by pressing the
left
button ( ). Select and move on to the next
setup screen by pressing the
right
button ( ).
