UNIPOWER
UP-2210R/P Hardware installation and configuration manual
78
If you need to access the meter beyond a router (or gateway) you need to set the gateway address.
The IT department can help you with the gateway address.
10.4.2
DHCP and SmartCom
If you use Unipower SmartCom communications you must activate DHCP. The meter will then
automatically ask the system for an ip address and get one.
Convenient, but
works only with SmartCom
. If you use DHCP you no longer know what ip the
meter gets and you can’t connect in the traditional way.
When using SmartCom you must enter the SmartCom server address like below and activate the
function:
Figure 82 SmartCom settings
Now you can connect using SmartCom from PQ Online:
Figure 83 Connect using SmartCom
Note that SmartCom is a service provided by Unipower and you need to have a valid subscription of
this before activating this function.
Contact your local representative for more information.
