Page 14
P O W E R I N G T E C H N O L O G Y
Document No. M00035-MAN rev. 3a
aspiro1u_m35-man-rev3a-0417.indd
3.1.3 Installation Warning
The following safety guidelines should be observed when transporting or moving the system:
•
Before moving the Power System, read the system specifications sheet to determine
whether the install site meets all the size, environmental, and power requirements.
• The system and the equipment included, should only be moved and installed by
qualified personnel to prevent bodily injury or any other hazardous conditions.
3.1.4 Restricted Access Area Warnings
The Power System is designed for installation in locations with restricted access often secured
by a locking mechanism. It can therefore be accessed only by a trained service person, who
is fully aware of the restrictions applied to the location, or by an authority responsible for the
location.
3.1.5 Electrical and Fire Enclosure
The unit is for building-in. A suitable Electrical and Fire enclosure shall be provided.
3.1.6 System Enclosure
Appropriate measures need to be taken to avoid intrusion of any unwanted objects or insects
into conductive areas of the power system as there is a potential risk of system damage.
Disclaimer:
UNIPOWER LLC assumes no liability or responsibility for system failures
resulting from inappropriate enclosure around the system.
3.1.7 Operating Temperature Warnings
To prevent the Power System from overheating, an automatic shutdown mechanism has been
installed. It is not recommended to continually operate the Power System in an area that
exceeds the maximum recommended operating temperature.
3.1.8 Electrical Safety Warnings
The following are electrical safety recommendations for working near the Power System:
WARNING
Observe low voltage safety precautions before attempting to work on the
system when power is connected. Potentially lethal voltages are present within the system.
