Uniphos FumiSense Pro UNIPHOS-250, Instruction Manual, Page: 14 / 25

14
7. In batch sampling mode, once sampling is over, monitor prompts for data logging mode
as shown below.
8. Press the UP key and after asking for confirmation, enter site and location value and
press ENTER key to log the data in to the instruments memory or press SET key to
move to the Purging page without logging / storing the data.
9. Instrument will enter into main menu page once purging is over.
Note: Any time in the menu page, if zero is not in its acceptable range, it will display
sensor drift and instrument needs to be calibrated by following procedure described in
4.2.
4.4 DATA DOWNLOADING MODE:
1.
In the menu page, when the ENTER key is pressed, instrument will enter into the data
downloading mode and the screen will appear as shown below.
On pressing UP Key, Complete summary or range of reports can be downloaded on
computer.
4.4.1 To download range of reports:
1. In data downloading mode, to print range of reports, select Report using UP/DN and
ENTER KEY in the data download page.
PH3: XXXX PPM
Press UP Key
to log data
UP - Download Data
DN - Erase Data
SET - Exit
ENT – Battery status
Remove Tubes
Press Enter Key
Download:
Summary/Report
Sensor
Drift
Please
Calibrate