80
3. NoAnser T06 7 Sec
NoAnser: No Answer
T06: the 6
th
trunk line
7 Sec: ringing 7 second
No incoming telephone number (without installed the CID card or caller didn’t
send the number)
4. L20Anser T06 7 Sec
NoAnser: No Answer
L20: extension 20
7 Sec: ringing 7 second
No incoming telephone number (without installed the CID card or caller didn’t
send the number)
3.2 CHECK-IN (CI) PROGRAM
3.2.1 Send "CI" command and station number to system.
Send “CI” command and station number with ended by 0DH, 0AH. The command will
send simultaneously to RS-232 while the attendant telephone orders the “CI” command.
Eg.: “CI 20" 0DH, 0AH : The Check-in station is 20.
3.2.2 Description for system response
A. "OK CI", station No., 0DH, 0AH: the check- in station is OK.
B. "Double Check in", station No., 0DH, 0AH: the station is duplicated check-in.
C. "Can't find out physical number!" 07H, 07H, 0DH, 0AH : this station number is invalid.
D. "Can't CI in Function!" 07H, 07H, 0DH, 0AH : this number is function code not station
no.
E. "Station number over 4 digits, can't check in!" 07H, 07H, 0DH, 0AH : the digit you
entered is exceed 4 digits.
3.2.3 To clear the programmed data after check-in
This feature is not available for the office used station.
A. CO Call duration and billing
B. Password
C. DISA Password
D. Alarm Call (Morning Call)
E. Do Not Disturb
F. Call Forward (Including Busy/ No answer forward)
G. Busy Station Queuing
H. Redial and Redial Memory
I. Background Music
J. Message
K. Absent Station Message
3.2.4 Station class of service: daytime class
The default class of service for check-in is daytime class
