It is recommended to use the
"diagonally push & roll"
method to gradually push
the gel sheet from the
device. Do not try to
directly tear it off.
At last, the removed
conductive gel can be used
to stick up the small pieces
of remaining gel on the
rubber.
1
2
● If it’s not been used for a long time after it’s unsealed, or has been used for more than ten times, it
should be replaced with a new conductive gel.
● When the viscosity is weakened, and the adhesive surface (conductive gel surface) is damaged, or
stains that cannot be removed. Be sure to replace it with a new one.
16
2.How to remove the conductive gel correctly
● The outdated conductive gel will affect the EMS output performance and may cause skin discomfort.
Please clean and replace the conductive gel regularly to maintain the device’s best performance.
● Do not use any paper or fabric to wipe the conductive gel, as this will affect the life cycle of it.
● The conductive gel contains the moisture material. If the storage environment is too dry, it will affect
the life cycle of it. After using the product, keep it in the dedicated storage bag.
● If you feel stinging pain & discomfort during the usage, please replace the gel sheet immediately.
