This product contains a rechargeable battery that still retain a
small amount of power. It is recommended that you fully
charge it before using it for the first time.
●
Place the two devices on the
front / back of the storage
stand, and make sure that
the input terminal and
output terminal are tightly
connected.
●
Insert the charging terminal to
the USB charging hole on top
of the heating area, and plug
the charger to the power
socket.
●
When charging, the LED
indicator area will flash
green
●
When charging is complete,
the LED will turn to constant
green light. Please remove
the charging cable once the
device is charged.。
Preparation before usage
9
1Charge the product.
●For the initial pairing, press the ^ & v button of the main & sub devices at the same
time for 3 seconds. You’ll see the red & green light flash rapidly, and it’ll start pairing
with each other. Please restart the devices after the pairing process is completed.
● After the restart process, if the main & sub devices do not automatically synchronize
with each other, please re-operate the pairing procedure again.
