3.Regularly renew your conductive gel
3.1 How to remove the conductive gel correctly
●
If it’s not been used for a long time after it’s unsealed, or
has been used for more than ten times, it should be replaced
with a new conductive gel.
●
The viscosity is weakened, and the adhesive surface
(conductive gel surface) is damaged, or stains that cannot
be removed. Be sure to replace it with a new one.
●
Conductive gel sheet is a consumable item. To ensure that
the device can have the best performance all the time, new
conductive gel should be replaced regularly.
●
If you feel stinging pain & discomfort during the usage,
please replace the gel sheet immediately.
1. It is recommended to use the "diagonally push & roll"
method to gradually push the gel sheet from the device. Do
not try to directly tear it off.
2. At last, the removed conductive gel can be used to stick up
the small pieces of remaining gel on the rubber.
●Please make sure that the power is turned off before the maintenance. There’ll is
a risk of electric shock if you proceed the maintenance when the power is on.
● Do not rinse or wipe with the paint thinner, detergent or alcohol.
● Make sure your hands are clean before touching the conductive gel sheet.
● It is forbidden to wipe the surface with the lint-free paper towels and fabrics.
● Do not place it in direct sunlight or excessively dry environment.
16
Summary of Contents for ES-110 neckare
Page 1: ...manual...
Page 2: ......
