4. Maintenance of the motor. The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with
oil or water.
5. Inspecting the carbon brushes. The motor employs carbon brushes which are consumable parts. Since and excessively worn carbon brush can result in motor trouble, replace
the carbon brush with new ones when it becomes worn to or near the “wear limit”. In addition, always keep carbon brushes clean and ensure that they slide freely within the
brush holders.
6. Replacing carbon brushes. Take out the carbon brush by first removing the brush cap and then hooking the protrusion of the carbon brush with a flat head screw driver.
When installing the carbon brush, choose the direction so that the carbon brush agrees with the contact portion outside the brush
tube. Then push it in with a finger as illustrated in Lastly, install the brush cap.
WARNING!
Be absolutely sure to insert the nail of
the carbon brush into the contact portion outside the brush tube. Caution must be exercised since any error in this operation can
result in the deformed the carbon brush and may cause motor trouble at an early stage.
7. Check for Dust. Dust may be removed with a soft cloth or a cloth dampened with soapy water. Do not use bleach, chlorine,
gasoline or thinner, for they may damage the plastics.
8. Disposal of the exhausted battery.
WARNING!
Do not dispose of the exhausted battery. The battery must explode if it is incinerated. The product that you have purchased
contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the
municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.
9. Storage. Storing in a place below 104°F (40°C) and out of the reach of children.
10. It is are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts may be changed without prior notice.
WARNING!
Repair must be carried Out to the Authorized Service Center. This Parts List will be helpful if presented with the tool to the Service Center when requesting repair or
other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
carbon brush
Accessories
WARNING!
ALWAYS use only authorized replacement parts and accessories. NEVER use replacement parts or accessories which are not intended for use with this tool. My hand
center if you are not sure. whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
ATTENTION!
Accessories are subject to change without any obligation.
12
13
14
12 Battery
13 Battery charger
14 Plastic case
Vibration and Noise
Hand-Arm Vibration Level(Load): 10.07 m/s2
Sound Power Level(Load): 93.29 dB(A)
Sound Pressure Level At Operator Position:
104.29dB(A)
