12
Reading Barcodes
Reading a barcode is quite easy and simple. Point the SP-2100 at a barcode and press the scan
button. Be sure to point the scan engine at the barcode, not at your face, and make sure to
position the light beam on the barcode. If the barcode is scanned successfully, you will hear one
beep and the LEDs will illuminate in green. The scanned barcode data will be displayed along with
the scan time and battery level.
Failed reading…
If you have problems scanning a barcode, try the following suggestions while
pointing the SP-2100 at the barcode and depressing the scan button.
Modify the angle of the SP-2100 in relation to the barcode, making the angle bigger or
smaller as needed.
Modify the distance between the barcode and the SP-2100, moving closer or further away
as needed.
Check option settings defined in the SP-2100 menu section and change options as needed.
Check that the barcode’s width does not exceed the light beam’s width and vice versa.
SP-2100 LCD DISPLAY CONDITIONS
SP-2100 SAVED DATA DISPLAY
DISPLAY
Standard
(ex: USA / EU / Asia and all countries)
TYPES
(stored data)
The SP-2100 can display the stored data on LCD window with a different way according to each
client requests and its display types. (Ex: Standard version above)
Antena BT Profile
Scan ready
Battery Level
Data Save
Condition
Volume
Condition
