background image

C O N T E N T S :

STOP! READ THIS OWNER’S MANUAL CAREFULLY BEFORE USING THIS PRODUCT!

!WARNING!

WATERSPORTS SAFETY CODE:

It is the owner’s responsibility to read the owner’s manual and instruct all users in the safe operation of these products.

 Please read this 

manual prior to inflating and using these products and keep for future reference. As with any sport, recklessness, inexperience, misuse, or neglect 
of the equipment may result in serious injury or death.

Watersports are fun and challenging but involve inherent risks of injury or death. To increase your enjoyment of the sport and to

reduce your risks, use common sense and follow these rules:

B E FO R E   YO U   S TA RT:

• Familiarize yourself with all applicable federal, state, and local laws, the risks inherent in the sport, and the proper use of the equipment.
• Know the waterways.
• Use caution and common sense.
• Do not use within 3m (10ft) of boats, docks, or other hard obstructions.
• Do not attempt or allow somersaults. Landing on the head or neck can cause serious injury, paralysis or death.
• Never use at night, or in low-light conditions.
• Never use in poor weather conditions, excessive wind, waves or lightning.
• Do not use on dry land.
• Do not use without proper anchoring.
• Do not swim under the product.
• Take extreme care when swimming between the shore and the product. Be cautious of any water traffic or other obstructions. Ensure all users are 
   capable swimmers and are not excessively fatigued. Swimmers should feel comfortable treading water for several minutes, and if fatigued should 
   feel comfortable flipping to their back and floating for a long period of time to regain energy.  Do not allow anyone to attempt to swim to or from the 
   product that are not physically able to do so.
• Always ensure that the swimming area around the product is free of submerged logs, rocks and sandbars. Ask about the local water conditions 
   before use.
• Only allow use of the product with proper supervision. Secure the product when not in use to prevent access by any other users.
• Do not jump or dive from any feature unless otherwise specified.
• Do not use in water where there are animals that could pose a threat to humans.
• If product is used in indoor pools, always ensure adequate ceiling height overhead.
• Always remove personal items such as rings, watches or other sharp objects before use.

YO U R   EQ U I P M E N T:

• Check all equipment prior to use. Inspect this item for missing, defective or worn parts. Never use the product if excessive wear or damage are 
   detected.
• Always check for proper inflation before each use. Temperature and environmental changes can cause changes in the air pressure. Using the 
   product over or under inflated is dangerous and can cause damage to the product, voiding the warranty.
• Always check security of the anchor(s) and all attachments before each use.
• Always wear a life vest (PFD) as required by the authorities in area of use.

! WA R N I N G ! :

WATERSPORTS INVOLVE RISKS OF SEVERE INJURY OR DEATH.  Follow all instructions and safety information below and in owner’s manual to reduce risks:
• ALWAYS WEAR A PROPERLY FITTED LIFE JACKET (PFD) approved by your country’s agency, USCG TPE III, ISO, etc.
• Never exceed skill level that you are accustomed for while using this product.
• Never use in shallow water or near shore, docks, pilings, and out of the way of watercrafts or other obstacles.
• Never jump or dive off of this product unless otherwise specified, and always ensure a safe speed while walking on it.  
• Always ensure that there is an observer devoted to watching over your safety regardless of the users age.
• Never use this product while under the influence of alcohol or drugs.
• Always be aware of other participants using this product to ensure not just your safety but also others around you. 
• Be aware of the location of the handles and only place your hands though them. 
• Never free swim near the location of this product unless you are entering on – and under no circumstances ever swim underneath this product.
• Check the product primary chamber is filled to 1.75 PSI (0,12 bar) before use. Check the product’s secondary chamber is filled to 1.3 PSI (0,09 bar).
• Do not exceed the weight capacity set by this product of 770 Lbs.(350 kg)
• Do not exceed the recommended number of maximum users of four (4).
• Never apply more than 280 lbs. of pressure in any one area.
• Read the entirety of this Owner’s Manual before use.

PG

4

Summary of Contents for NEPTUNE'S STEPS














































Reviews: