![background image](http://html.mh-extra.com/html/union/cwd2005-plus/cwd2005-plus_manual_842962015.webp)
Power requirements
User Manual CWD2005 Plus
7. Power requirements
The system requires one power supply.
Power supply:
120, 1~, N, PE, 60Hz
Work on electrical system may be accomplished by trained and instructed personnel only.
Danger!
Mains voltage 120V, 60Hz
Contact with this voltage can cause serious burns or even death.
Work on electrical circuits may only be carried out by qualified electrician.
Disconnect the mains voltage before installation or maintenance.
Warning!
The VDE regulations, the low-voltage directive 2006/95/EG, the local
accident- prevention regulations and these instructions for use must be
observed and followed at all times!
To disconnect the power supply, the main switch is located at the front of the analyzer in the
right corner.
15