![background image](http://html1.mh-extra.com/html/union/59549/59549_owners-manual-and-safety-instructions_3853116004.webp)
Page 4
For technical questions, please call 1-888-866-5797.
Item 59549
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under subheadings therein
before set up or use of this product.
To prevent serious injury and DEATH from accidental firearm discharge:
Unload gun completely, including chamber, before storing.
Lock up guns and ammunition separately, out of children’s reach and out of sight.
Even when stored in gun safe, use gun-lock to disable gun.
Separate gun safe keys from other keys.
Leaving gun unsecured may result in criminal charges.
Opening Safe for First Time
1. Insert override key and turn key
clockwise to unlock safe.
2. Remove Battery Compartment Cover.
Install four AA batteries . Replace
Battery Compartment Cover.
Registering Fingerprints
Note:
Safe has a maximum
storage of 50 fingerprints.
1. Remove Battery Compartment Cover
to access the Reset Button.
2. Press and hold Reset Button until all lights
flash blue once and safe beeps once.
3. Press finger to Biometric Scanner.
Remove finger after the Scanner
flashes blue once and beeps once.
4. Repeat step 3 three times or until Scanner
flashes blue twice and safe beeps twice.
5. If Scanner flashes red five times and beeps
five times, registration has failed. Retry
fingerprint registration beginning from step 1.
Note:
If Scanner flashes red five times and
beeps five times directly after pressing Reset
Button, fingerprint storage capacity is full.
Deleting Registered Fingerprints
1. Remove Battery Compartment Cover
to access the Reset Button.
2. Press and hold Reset Button until all lights
flash blue once and safe beeps once.
3. Keep holding Reset Button until Scanner
flashes twice and beeps twice.
4. Release Reset Button. All registered
fingerprints have been erased.
Programming Security Code
1. Remove Battery Compartment Cover
to access the Reset Button.
2. Press and hold Reset Button until all lights
flash blue once and safe beeps once.
3. Enter a four to six digit code. Press
Reset Button when finished.
4. If code has been accepted, Button lights will
flash blue twice and safe will beep twice.
5. If Button lights flash red five times and safe
beeps five times, Safe has failed to set security
code. Repeat process beginning from step 1.