3/3
DEUTSCHE UHRMACHERKUNST.1893
Moon phase correction
Crown in position
II
, intermediate
Pull the crown out to position
II
and turn it backwards to
correct the moon position, referring to a lunar phase chart.
Push the crown back into the rest position
I
. During this
operation, your watch will continue running, so the time will
not need to be re-set.
Important
Moon phase correction is impossible between 3 a.m. and 4 a.m.
Day correction
Press the corrector as many time as needed (
15
) to move
the disc forward until the desired day (
6
) is displayed. During
this operation, your watch will continue running, so the time
will not need to be re-set.
Important
Day correction is impossible between 9.30 p.m. and midnight.
Chronograph function
Press the Start/Stop push-button (
12
) to start the chrono-
graph. Press the Start/Stop push-button (
12
) again to stop it.
The chronograph will resume if the Start/Stop push-button
(
12
) is pressed again (added times), or the three chronograph
hands (
9
,
10
and
11
) will return to zero if push-button (
13
)
is pressed.
Notes
The 12 hour counter (
11
) has an area with alternating col-
ours (black/white) indicating every half hour, matching the
outer numerals (0 to 30 minutes) and inner numerals (30 to
60 minutes) of the same colour on the 30 minute counter
(
10
).
Depending on the model you have chosen, the colours of the
12 hour counter area (
11
) may vary (e.g. white/red, black/red,
white/yellow, etc.), but they always match the numerals on
the 30 minute counter.
Tachymeter
Start the chronograph and stop it once a distance of 1 km
has been covered by pressing the Start/Stop push-button (
9
).
The chronograph hand will be pointing to a numeral on the
tachymeter scale (
8
), indicating the speed in km/h.
CARE AND MAINTENANCE
We would advise you to clean your watch regularly (except
for the leather strap) using a soft cloth and lukewarm soapy
water. After immersion in salt water, rinse the watch in fresh
water and leave it to dry completely.
Ensure that you do not leave it in places subject to great
temperature and humidity variations, in intense sunlight or
near strong magnetic fields.
We recommend you have your watch inspected every 3
to 4 years by your approved dealer or agent. For an irre-
proachable maintenance service and to ensure the warranty
remains valid, always approach an approved dealer or agent.
Water resistance precautions
Your watch is water resistant but, following a shock, it may
lose its water resistance without you realising. Water resist-
ance must be checked up during its scheduled inspection.
Important
In the event of failure of your watch, entrust it only to an
approved dealer or agent (see the warranty).
www.union-glashuette.com
U-7751_EN / 2013
U-7751
