2/3
DEUTSCHE UHRMACHERKUNST.1893
CONGRATULATIONS
Congratulations on your choice of a watch by UNION
GLASHÜTTE/SA.
®
- a German brand among the most
renowned and with the richest traditions.
This exceptionally designed, undeniably attractive timepiece
also has a superior design quality. Using only the highest value
materials and components, your UNION GLASHÜTTE/SA.
®
watch is protected against shocks, temperature variations,
water and dust.
Its sapphire crystal has a double sided anti-reflective coating,
and it is driven by a mechanical movement chronograph U
7751 with automatic winding, day corrector at 10 o'clock
and moon phase.
To ensure perfect and accurate running for many years to
come, we recommend you attentively follow the advice given
in these instructions.
We hope you will be very pleased with your UNION
GLASHÜTTE/SA.
®
timepiece !
USE
Winding
Crown in position
I
, not pulled out
Manual winding is necessary if you have not worn your watch
for some considerable period of time. To restart it, you only
need to turn the crown a few times (clockwise), or to tilt
your watch from side to side a few times. To restore your
watch's 46 hour power reserve, around 32 turns of the
crown (forward) are required.
When wearing your watch, the automatic device winds it
every time you move your wrist.
Notes
The accuracy may be influenced by the wearing conditions.
There is no stop of the crown at full winding.
Setting the time
Crown in position
III
, pulled out
Pull the crown out to position
III
carefully; the seconds hand (
3
)
will stop. Turn the crown forwards or backwards to the desired
time, and then push it back into the rest position
I
.
Once the hour hand passes the 12 o'clock position, you can
see if it is indicating midnight (date and day will change) or
midday (date and day will not change).
Advice on how to synchronise your watch
To synchronise the seconds hand (
3
) with an official time
signal (radio/TV/Internet), pull out the crown to position
III
;
the seconds hand will stop. At the signal, push the crown back
into the rest position
I
.
Date and month correction
Crown in position
II
, intermediate
The date display uses a three-arm hand, just one of which
indicates the correct day precisely. The shortest arm points
to days 1 to 10, the medium arm to days 11 to 20 and the
longest arm to days 21 to 31.
You will need to re-set the date and month manually after
months with less than 31 days.
Pull the crown out to position
II
and turn it forwards until it
displays the desired date and month. Push the crown back
into the rest position
I
. During this operation, your watch
will continue running, so the time will not need to be re-set.
Important
Never correct the date between 10 p.m. and 2 a.m.; the move-
ment is changing the date and possibly the month.
www.union-glashuette.com
U-7751_EN / 2013
U-7751
