Union Community AC-7000 User Manual Download Page 59

Page: 59 / 75

AC-7000 User guide

㈜

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)

Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:[email protected]
http://www.unioncomm.co.kr

None

General case. It does not use Wiegand out port.

26bit

Because it sends

“Sitecode[1

byte] + User ID[2 byte

]”

, set the user ID

less or equal than 4 digits.

Send example) In case of SiteCode:045(2Dh), UID:6543(198Fh)

1 00101101 0001 1001 10001111 0

l34bit

Because it sends

“Sitecode[1

byte] + User ID[3 byte

]”

, set the user ID

less or equal than 7 digits.

But, if the user ID is 8 digits, ignore sitecode and send only the

“

User

ID[4byte]

”

Send example) SiteCode:001(1h), UID:123456(1E240h)

0 00000001 00000001 11100010 01000000 0

User

definition

It is set by the user definition, which only can be set in the server, and

the setting type only can be inquired in the terminal.

Click [OK] button to apply the set value, and click [BACK] button to cancel and return.

3.8.Display settings

3.8.1. Theme

If you select

[Display]->[Theme]

in the main menu, the following window appears.

▶

Basic setting : Same with the window at the left

side.

▶

The main background.
It sets the background of the basic window. You
can inquire the next image by clicking [

] button.

Click [OK] button to apply the set value, and click [BACK] button to cancel and return. If

you want to set another items, click the menu you want to change at the left side.

Summary of Contents for AC-7000











































































Search results

Summary of Contents for AC-7000

Reviews:

Related manuals for AC-7000

Brands by name

Popular brands

Union Community AC-7000, User Manual

Search results

Summary of Contents for AC-7000

Reviews:

Related manuals for AC-7000

Brands by name

Popular brands