Union Community AC-7000 User Manual Download Page 29

Page: 29 / 75

AC-7000 User guide

㈜

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)

Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:[email protected]
http://www.unioncomm.co.kr

3.3.1.3. Fingerprint registration

①

user] screen.
Click [ ] button to cancel the registration and return.

Choose the finger to be registered when the left screen

appears.

※

If you register the multiple fingers, the fingers

already registered are represented by blue circle
(

). If you select the finger already registered,

the following message appears, and if you select the

re-registration, you can register again with deleting

previously registered fingerprint.

②

Enter the fingerprint with referring

„

1.7 Proper

fingerprint registration and input methods‟

. Enter the

fingerprint twice according to the screen instruction as

follows.

When the light is turned on at the fingerprint sensor
with the message

„

‟

, put your finger on the

input screen and wait for 2~3 seconds until the light is

turned off.

③

When the message

‘

Enter the same fingerprint

again

’

appears, enter the same fingerprint again.

※

In the second fingerprint input after the first
fingerprint, you should take off your finger from the

screen once and input again.

Summary of Contents for AC-7000











































































Search results

Summary of Contents for AC-7000

Reviews:

Related manuals for AC-7000

Brands by name

Popular brands

Union Community AC-7000, User Manual

Search results

Summary of Contents for AC-7000

Reviews:

Related manuals for AC-7000

Brands by name

Popular brands