Union Community AC-7000 User Manual Download Page 52

Page: 52 / 75

AC-7000 User guide

㈜

Union Community / Hyundai Topics building 5

floor, 44-3, Bangi 2-dong,

Songpa-gu, Seoul, Korea (138-050)

Tel: 02-6488-3000, Fax: 02-6488-3099, E-Mail:[email protected]
http://www.unioncomm.co.kr

If you want to delete all the image log in the terminal,
click [YES], and if you want to cancel, click [NO] or [ ]

button.

If there is no signal for five seconds in this state, the

message box disappears without deletion.

If it is deleted successfully by clicking [YES], the success message in the <Fig. 3-5> is

displayed. The images saved as logs are only deleted and the authorization logs are not

deleted.

3.6.6.5. Delete all

If you select the

[System]->[Database management]->[Delete all]

in the main

menu, the following window appears.

If you want to initialize the terminal in the factory setting,

click [YES] button, and if you want to cancel, click [NO] or
[ ] button.

If there is no signal for five seconds in this state, the

message box disappears without initialization.

If it is deleted successfully by clicking [YES], the success message in <Fig. 3-5> appears,

and the display language and voice is changed to the default value English.

All the set value, users and log information besides the MAC address in the terminal to

make the terminal in the factory setting.

The restoration after the deletion is

impossible, so be careful.

3.7. Terminal settings

3.7.1. Sounds

If you select the

[Terminal]->[Sound]

in the main menu, the following window

appears.

Summary of Contents for AC-7000











































































Search results

Summary of Contents for AC-7000

Reviews:

Related manuals for AC-7000

Brands by name

Popular brands

Union Community AC-7000, User Manual

Search results

Summary of Contents for AC-7000

Reviews:

Related manuals for AC-7000

Brands by name

Popular brands