manualshive.com logo in svg

Union Community AC-5000, User Manual

Share
Download
Union Community AC-5000 User Manual Download Page 61

AC-5000 / 5100 User Guide                                                                                                                               

61

 

 

UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,

 

Songpa-gu, Seoul, 05836, Republic of Korea 

TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :[email protected] 
http://www.unioncomm.co.kr 

The file name can be up to 15 characters, including the extension name, with the Wav 

file in 8KHz 16-bit mono form only. If any data in a different format is downloaded, the 

transmission result will be displayed as a version error. 

 

        In the case of a voice failure, designate the file as ‘Fail voice file (.wav)’ and then change 

it in the same way. 

 

To change the user’s defined voice into the default voice, release the check mark in the 

‘User Voice’ item in ‘3.5.5 Display’. 

 

 

3.9.3. Change User Text 

         

  When  selecting  ‘Download  customized  file’  in  UNIS  program,  the  following  screen 

appears: 

 

 

 

Designate the  file  as  ‘Defined  Text  File  (.csv)’,  select  CSV file  (.csv)  and  click the  ‘Send’ 

button. The terminal select window will appear. Select the terminal from the terminal list 

window  and  click  the  ‘Send’  button  again.  The  file  is  transmitted  with  the  downloaded 

result displayed. 

 

CSV file can be created and saved as a csv file type after changing the desired text in the 

Excel (.xls) file provided with the terminal firmware. To change from the user’s defined 

text to the default text, release the check mark in the ‘User Text’ item in ‘3.5.5 Display’. 

 

 

Summary of Contents for AC-5000


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands