Union Community AC-5000 User Manual Download Page 58

Page: 58 / 65

AC-5000 / 5100 User Guide

UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,

Songpa-gu, Seoul, 05836, Republic of Korea

TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :[email protected]
http://www.unioncomm.co.kr

3.8. Information

Select ‘6. Information’ in the main menu and the following screen appears:

Menu to view the terminal settings.

Press;

[1] key to view various terminal configurations.

[2] key to view network configuration, such as IP.

[3] key to view the user registration status, etc.

[4] key to view log data.

[5] key to view firmware version.

3.8.1. System Info

Select

◆

[ENT~]



[6. Information]



[6. System Info] in the initial screen

◆

Press the [F4 (

←

)] key to exit to the parent menu.

3.8.2. Network Info

Select

◆

[ENT~]



[6. Information]



[2. Network Info] in the initial screen

◆

Press the [F4 (

←

)] key to exit to the parent menu.

Summary of Contents for AC-5000

































































Search results

Summary of Contents for AC-5000

Reviews:

Brands by name

Popular brands

Union Community AC-5000, User Manual

Search results

Summary of Contents for AC-5000

Reviews:

Brands by name

Popular brands