Motor with coupling
MTJ MRJ Series
MANUAL
1.050.0
MOUNTING
For tightening torques for the screws please refer to page number 1.005.0
STEP 2
STEP 3
STEP 1
STEP 1
STEP 2
STEP 3
STEP 1
If motor adapter has inner through hole of the same size its entire length.
Attach one half of the coupling to the shaft of the linear unit and other to the shaft of the motor.
Insert coupling spider into one half of the coupling.
Attach motor adapter to the linear unit.
Attach motor to the motor adapter.
STEP 1:
STEP 2:
STEP 3:
The maximum torque and maximum
speed of the motor must never exceed the
limits of the Linear Unit!
Linear Units
Linear Units
Linear Units
Linear Units
Linear Units
If motor adapter has inner through hole with the narrowing at one end.
Attach motor adapter to the side on which the through hole is narower.
Attach complete coupling to the axle on the wider side of the hole.
Assemble two parts together and tighten the remaining screw on the coupling through appropriate hole in motor adapter.
STEP 1:
STEP 2:
STEP 3:
Tighten the screws on the coupling halves
with coupling tightening torque.
Linear Units
Linear Units
Linear Units
Linear Units
Linear Units
The specifications in order to improve the products in this catalogue are subject to change without notice.
