manualshive.com logo in svg

Unimotion MRJ 110 L, Maintenance- And Assembly Instructions

Share
Download
Unimotion MRJ 110 L Maintenance- And Assembly Instructions Download Page 12

Mechanical switch with the bracket

Inductive switch with the bracket 

1.045.0

MTJ MRJ Series

MANUAL

MOUNTING

 Mechanical and Inductive switch with the mounting bracket

Activation block

STEP 1:

 Mount the activation block 

on the connection plate in the desired 
location. The activation block can be 
mounted on the left or right side. After 
the activation block is placed in the 
desired location, tighten the screws.

STEP 2: 

Place either the mechanical 

switch or inductive switch with 
brackets in the slots and position 
them on the desired location. The 
mechanical or inductive switch with 
brackets can be placed in the slots 
either on the left or right side of the 
profile of Linear Unit.

STEP 3: 

After the mechanical or 

inductive switch with the bracket is 
placed in the desired place in the 
slots, tighten the screws of the 
bracket.

For tightening torques for the screws please refer to page number 1.005.0

STEP 1

STEP 2

STEP 3

The specifications in order to improve the products in this catalogue are subject to change without notice.  

Summary of Contents for MRJ 110 L



































Reviews:

No comments

Brands by name

Popular brands

Load more brands