Maintenance Manual
12
of the radio.
Hold the radio and battery pack with the back of them facing you. See Figure
Align the hook back of the radio with the hook front side of the battery pack
Press and slide the battery pack fully upper side of the radio until the battery release latch click into
place.
Removing the Bttery Pack
Ensure the ON/OFF volume switch is set to OFF position
of the radio.
Press down the release latch and slide the battery pack
down side of the radio. See Figure
Charging the Battery Pack
New batteries or batteries that have been stored for a long time period of time, should be fully charged
before placing into service. Low battery voltage will shorten the talk range and will make the
performance of radio worse.
When the battery pack requires charging the battery indicator in the LCD will blink and the radio will
sound a high pitch tone every seconds.
How to Charging
Plug the charger (CHZ-260FB) into the electricity power outlet for AC220V.
The charger (CHZ-260FB) has two slots.
When charging the radio with the battery installed, insert the radio into front slot of the charger
after power off.
When charging the battery only, insert battery into rear slot of the charger.
Although the green LED is on after full charge, please continue the charging for 30 more minutes
for the complete full charge.
During the charging
red LED is turn ON
