21
RAZOR TIG 200 ACDC
OPERATING MANUAL
10.
Select the TIG process you wish to use and setup your
weld cycle as desired.
11.
Connect earth clamp to your workpiece.
12.
Place your TIG torch near the workpiece and initiate
an arc by pressing the trigger button on the TIG
torch. (If HF mode is activated.)
9.
Connect the plug into a power point, then switch the
machine ON.
RAZOR 200 ACDC Manual FEB23.indd 21
RAZOR 200 ACDC Manual FEB23.indd 21
24/02/2023 3:07:06 PM
24/02/2023 3:07:06 PM
