14
RAZOR TIG 200 ACDC
OPERATING MANUAL
Pulse Mode
AC Pulse and DC Pulse add a secondary base amperage that the machine will osicllate to
based on the settings chosen. Pulse TIG is great for heat management and also aids in out-
of-position welding. Turning on Pulse mode enables the Base Amp, Pulse Width, and Pulse
Hz settings for fine-tuning your pulsed weld cycle.
To cycle through the Weld Cycle control, first press the control knob, then rotate in either direction to scroll
through the various settings. Press the control knob again to enter that setting variable. The selected variable
indicator will now begin to flash to indicate you can adjust that setting. After 5 seconds the system will revert back
to the default paramter (Peak Amps).
TIG PULSE MODE
PULSE
ON/OFF
Amperage Adjustment
When this indicator is lit you are in amperage adjustment mode. It functions for both MMA
mode and Lift TIG mode.
Hot Start
This indicates that you are adjusting the Hot Start parameter. Hot Start provides a boost
of amperage at the beginning of the weld cycle, to help ignite the electrode. Hot Start can
provide up to a 80 amp boost based upon your settings.
Arc Force
This indicicates that you are adjusting the Arc Force parameter. Arc Force provides up to a
40 amp boost of your welding current to ensure optimum arc performance.
Anti-Stick
This unit has anti-stick functionality by default. If a short circuit occurs while welding for
more than 2 seconds, the machine will automatically drop to 20A to allow the short circuit
to be cleared. When the short circuit is cleared the welding current will automatically return
to the set current.
MMA SETTINGS
ANTI
STICK
8. Weld Cycle Details
RAZOR 200 ACDC Manual FEB23.indd 14
RAZOR 200 ACDC Manual FEB23.indd 14
24/02/2023 3:07:03 PM
24/02/2023 3:07:03 PM
