Unimax AT320, User Manual, Page: 11 / 16

22
??? PART LISTING
Column
Position Dimensions Name
1 CQ9332A-01-001 Bed/stand
2 CQ9332-01-003 Rack poles
3 6×18 GB117-86 Conical stud
4 M8×16 GB70-85 Screws with inner hexagonal head slot
5 CQ9332-01-005 Block
6 CQ9332-05-015 Washer
7 M5×12 GB68-85 Screw
8 M6×25 GB75-85 Screw
9 M6 GB6170-86 Hexagonal nuts
10 M6×35 GB70-85 Screws with inner hexagonal head slot
11 8 GB1155-79 Oil lubrication cap
12 6×40 GB117-86 Conical stud
13 M6×30 GB70-85 Screws with inner hexagonal head slot
14 M6×45 GB70-85 Screws with inner hexagonal head slot
15 M6×40 GB5782-86 Screws with hexagonal head
16 HA300-05-044 Grooved plate - in right front side
17 M5×10 GB818-85 Screws with sink cross-conical head
18 CQ9332-01-008 Block
19 M8×20 GB79-85 Setting screws with inner hexagon and conical tip
20 M8 GB6170-86 Hexagonal nuts
21 HA300-05-041 Grooved plate - in right front side
22 CQ9332-05-027 Chain tackle gear
23 CQ9332-05-006 Toothed gear
24 AT320-05-004 Cross feed guiding screw
25 5×16 GB1096-79 Flat spline
26 4×18 GB1096-79 Flat spline
27 8201 GB301-84 Cylindrical bearing
28 6 GB1155-79 Oil lubrication cap
29 M6×16 GB70-85 Screws with inner hexagonal head slot
30 5×20 GB117-86 Conical stud
31 CQ9332-05-024 Dial
32 AT300-03-139 Spring lamella
33 AT300-03-138 Dial socket
34 12×40 GB4141.9-84 Handles with socket
11
Manual machine control
Gear shifting chart (lathe)
Thread cutting:
•
During thread cutting make sure that the positions of the toothed gears are the same as the positions of
the shifting levers to ensure correct thread pitch.
•
The relationship between the gear and the lever position is shown in the chart. During operation follow the
instructions on the transmission label or in the following chart.