Unimax AT320, User Manual, Page: 10 / 16

10
Electric control of machine power drives.
Lathe
Red round button: Stop button - emergency stop.
Stops the entire machine.
Green round control light: Indicates power on - main
switch in the ON position.
Green round button: main switch.
Red switch (in the lower middle part): switches
on/off the cooling fluid pump.
Milling/drilling spindle
Black switch. Switches on/off the spindle engine - seen on the left side of the picture.
23
35 M10 GB923-88 Nut
36 CQ9332-05-008 Cross feed guiding screw housing
37 M8×40 GB70-85 Screws with inner hexagonal head slot
38 CQ9332-01-007 Base platform
39 CQ9332-5-005 Front platform
40 CQ9332A-05-002 Stand
41 HA300-05-042 Grooved plate - in left rear side
42 HA300-05-044 Grooved plate - in left front side
43 6 GB1155-79 Oil lubrication cap
44 AT320-01-009 Cross nut
45 AT320-00-006 Work table
46 AT320-01-002 Longitudinal feed screw
47 CQ9332A-01-010 Right pedestal
48 6 GB1155-79 Oil lubrication cap
49 M8×20 GB70-85 Screws with inner hexagonal head slot
50 CQ9332-01-010 Socket
51 CQ9332-02-011 Guiding studs
52 AT520-03-106 Guiding studs
53 CQ9332A-01-012 Socket
54 5×30 GB117-86 Conical stud
55 M8×60 GB70-85 Screws with inner hexagonal head slot
56 M5×10 GB71-85 Setting screws with groove and conical tip
57 5×35 GB119-86 Cylindrical stud
58 CQ9332A-01-007 Adjustment handle housing
59 CQ9332A-01-004 Control socket
60 M10×32 GB4141.12-84 Ball handle socket
61 M6×12 GB70-85 Screws with inner hexagonal head slot
62 CQ9332A-01-009 Pedestal
63 CQ9332A-01-006A Shaft socket
64 CQ9332A-01-003A Control pole
65 M8×8 GB73-85 Setting screw with flat tip
66 0.5×6×15 GB2089-80 Spring
67 6 GB307-88 Steel ball
68 M8×15 GB71-85 Setting screws with groove and conical tip
69 0.5×6×25 GB2089-80 Spring
70 4×25 GB117-86 Conical stud
71 AT520-03-014 Connecting socket