Page 4 of 5
(1-05-3)
4. Remove ironing bands.
a. Locate the ironing band tension systems on
each side of the finisher. Refer to Figure 9.
b. Remove tension screw and bracket from
press-roller tension spring on each side of
finisher.
c. Unhook the ironing band tension spring from
the tension pin on each side of finisher. Refer
to Figure 10.
d. Use manual crank to move cylinder until
ironing band connection point is at top of rear
drive roller.
e. Remove pin from teeth of ironing band. Refer
to Figure 11.
NOTE: Do not release bottom portion of ironing
band.
FWF28N
1
Tension Screw
2
Bracket
Figure 9
RIGHT SIDE OF FINISHER
1
2
1
2
FWF5N
1
Tension Spring
2
Tension Pin
Figure 10
FWF30N
1
Guide Ribbons
2
Flap of Ironing Band
3
Pin
4
Ironing Band Guide
Figure 11
1
2
1
2
3
4
