Unimac 13 Inch, Important Instructions

Page: 2 / 5

Page 2 of 5
(1-05-3)
2. Remove chain tensioner from right side of
machine. Refer to Figure 2.
3. Remove feeding bands.
a. With a standard screwdriver, pop clamp open
at left end of feeding roller. Refer to Figure 3.
b. Remove clamp from roll.
c. Peel back adhesive strip from left side of
feeding roller to expose roll pin. Refer to
Figure 4.
d. Using a center punch, completely knock out
feeding roll pin. Refer to Figure 5.
FWF67N
1 Tensioning Chain
Figure 2
FWF22N
1 Left Side of Finisher
2 Top Panel
3 Screwdriver
4 Clamp
5 Feeding Roller
Figure 3
1
2
3
4
5
1
FWF23N
1 Top Panel
2 Roll Pin
3 Feeding Roller
4 Adhesive Strip
Figure 4
FWF24N
1 Roll Pin
2 Feeding Roller
3 Top Panel
4 Feeding Band
Figure 5
1
2
3
4
1
2
3
4