Unilumin Uslim-O Series, Product Manual

Page: 35 / 92

Chapter 3 LED Display Control Setting
25
3) After exiting, check whether the settings are correct. If you need to change the
settings, select the information to be changed, click Edit , and change the
information. Then click Confirm to finish the scheduled adjustment setting, as
shown in Figure 3-16:
Figure 3-16 Finishing the Scheduled Adjustment Setting
3.4.3 Auto Adjustment
Generally, you need to use the function card and the light sensor to enable auto
adjustment of brightness for the display. Before use, configure the function card first.
Click Function Card , as shown in Figure 3-17:
Figure 3-17 Configuring a Function Card