Unilumin Uslim-O Series, Product Manual, Page: 46 / 92

Chapter 3 LED Display Control Setting
36
5) Adjust Coefficient: Perform a simple adjustment if the displaying effect is not good
enough after you upload the coefficient. Then click Next .
Figure 3-33 Simple Adjustment
Red
：
Adjust the red brightness value of calibration coefficients.
Green
：
Adjust the green brightness value of calibration coefficients.
Blue
：
Adjust the blue brightness value of calibration coefficients.
6) Save Coefficients: Click Save to save the correction coefficients to the hardware.
The saved coefficients are retentive even after a power failure. Then click Finish .
Figure 3-34 Saving Correction Coefficients