Unilumin ULW III, Product Manual

Page: 44 / 86

Chapter 3 LED Display Control Setting
34
5) Adjust Coefficient: Perform a simple adjustment if the displaying effect is not good
enough after you upload the coefficient. Then click Next .
Fig 3-19 Simple Adjustment
Red
：
Adjust the red brightness value of calibration coefficients.
Green
：
Adjust the green brightness value of calibration coefficients.
Blue
：
Adjust the blue brightness value of calibration coefficients.
6) Save Coefficients: Click Save to save the correction coefficients to the hardware.
The saved coefficients are retentive even after a power failure. Then click Finish .
Fig 3-20 Saving Correction Coefficients