17
3
）
Press "
" button to cancel or turn on the
auto power-off function.
4.5 Measurement Preparations
1
）
Turn the transfer switch, turn on the power.
If the battery voltage is low (
about
≤
3.5V)
,
the LCD
will show “
”, then the battery
shall be replaced
2
）
When the meter has not entered into
measurement, it will automatically enter the
status of automatic scan, the meter displays as
the following diagram shows.
4.6
E
nable low-pass filter (AC current only)
Press "
" button to enable or disable
the low-pass filter function. When the low-pass
filter function is enabled, the low-pass filter of
the measured signal is attenuated by -3dB at
approximately 1 kHz.
Summary of Contents for SKILL
Page 1: ...User Manual SKILL Intelligent Digital AC DC Clamp Meter...
Page 30: ...30...
Page 31: ...31...
