page 3
Introduction
Front Panel
Rear Panel
Set Up
Operating Modes
Protection
Specifications
Safety Precautions
To reduce the risk of electrical shock or f ire, do not expose this unit rain
or moisture.
Do not spill water or other liquids into or on to your unit.
Do not attempt to operate this unit if the power cord has been frayed or
broken.
Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical shock
and f re in case of an internal short.
Disconnect main power before making any type of connection.
Do not remove the cover under any conditions. There are no user
serviceable parts inside.
Never plug this unit in to a dimmer pack.
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only, use of this product outdoors
voids all warranties.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit in a safe and stable manner.
Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.
Cleaning -The outside of the unit should be wipe down with a soft cloth
and mild cleaner when needed.
Heat -The amplifier should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a marked
change in performance.
Congratulations and thank you for purchasing
MS series
amplifier. This
amplifier is a representation of Power Studio’s continuing commitment to
produce the best and highest quality audio products at an affordable price.
These amplifiers are designed to provide a big impact in sound
reproduction. Please read and understand this manual completely before
attempting to operate your new amplifier. This booklet contains important
information concerning the proper and safe operation of your new amplifier.
Unpacking:
Every
MS series
amplifier has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your unit for any damage
and be sure all accessories necessary to operate the system have arrived
intact. In the event damage has been found or parts are missing, please
contact your dealer for further instructions.
Installation:
This amplifier is designed to mount into a standard
19”rack. The front panel provides four holes used to screw the unit into a
rack. The unit also provides a way to rear mount the unit into a rack for
added security. Rear mounting the unit is especially recommended if the
unit is to mounted into a mobile rack.
Introduction
UNiK A
MS550 / MS750 / MS1050 / MS2050 / MS3050
