background image

UNiKA DI-USB

    User Guide

2

The DI-USB is a high-resolution stereo digital audio converter (DAC) and 

direct box that is designed to connect to any computer system to seamlessly 

transfer digital audio to analog. 

A  professional  Hi-Z  direct  input  is  also  equipped,  this  is  most  commonly 

used with guitar pickups or keyboards, it also can be fed either from a line-

level output from the head (pad set to -20dB) or from the amplifier power 

output. A stereo pair of balanced XLR audio outputs with adjustable level 

control  then  feeds  the  signal  to  a  microphone  preamplifier,  PA  system, 

mixing console or even a powered speaker! 

Made  for  plug  and  play  simplicity,  the  DI-USB  will  automatically  be  listed 

as  an  available  sound  card  in  the  audio  settings  in  all  popular  operating 

systems

,

including Windows 7/8, Windows 10 and Mac OSX. 

Connection to a computer is accomplished through a standard USB type-B 

port.  Digital-to-analog  conversion  can  be  monitored  on  headphones 

through  the  3.5mm  analog  output  jack  to  check  signal  quality  and  level 

before connecting to a sound system. Two isolated output transformers are 

equipped to eliminate any hum or buzz caused by ground loops. To further 

reduce  susceptibility  to  noise,  this  is  augmented  with  a  ground  lift  switch 

that lifts pin-1 on both XLR jacks.

FEATURES

•  Stereo USB Laptop Direct Box.
•  High impedance direct input for electronic musical instrument signal feed.
•  High performance 24bit digital audio converter.
•  Ready to use without the need of a driver.
•  Standard USB type-B port for connection to computer.
•  3.5mm analog headphone output to check signal.
•  Level control for outputs and headphone.
•  The direct input signal will be mixed to the USB stereo signal at the output stage.
•  A Mono-Sum switch to mix the left and right channel signals to form a

 

monaural signal in both output channel.

•  Selectable 3 steps attenuator for Hi-Z direct input.
•  Accept power from 9V battery, +20V to +48V phantom power or 5V from USB. 
•  2 channel XLR Balanced Low-Z output with isolation transformer.

Summary of Contents for DI-USB













Reviews: