Unihedron SQM-LU, Operator'S Manual

Page: 39 / 67

7.12 Command line parameters
7.12 Command line parameters
UDM can be started from the command line. Other stored parameters (like timezone) will be recalled automatically.
Here is the summary of options:
Table 7.3: Log continuous command line parameters
Parameter Description
-LCMS,x Every x seconds
-LCMM,x Every x minutes
-LCM,1 Every 1 minute on the minute
-LCM,5 Every 5 minutes on the 1/12th hour
-LCM,10 Every 10 minutes on the 1/6th hour
-LCM,15 Every 15 minutes on the 1/4 hour
-LCM,30 Every 30 minutes on the 1/2 hour
-LCM,60 Every hour on the hour
-LCR Start recording right away
-LCTH,x Threshold setting. Readings equal to or greater than x (in mpsas)
get recorded. If x=0 then all readings are get recorded.
-LCMIN Minimize Application after Log continuous window starts up
Table 7.4: Select device command line parameters
Parameter Description
-SEI,x Select Ethernet device where x = IP address
-SEM,x Select Ethernet device where x = MAC address
-SUC,x Select USB device where x = communication portname i.e. /t-
ty/USB0
-SUI,x Select USB device where x = ID number ex FTD12345
Table 7.5: Select device command line parameters
Parameter Description
-N Do not search for devices at startup. This cuts down startup time,
the user must press the
Find
button to find devices.
-P Display plotter window.
Unihedron SQM-LU Operator’s Manual -
20170728
39