7 Unihedron Device Manager
Figure 7.24: Log Continuously GPS tab
Enter the port name into the Port field, then enable the GPS. Once enabled, UDM scans the GPS port for three NMEA
words.
Upon succesful parsing of the GPS data, UDM illuminates (with bright green) the associated indicators (GPRMC,
GPGGA, GPGSV). If too much time passes, the indicators fade to black.
The signal strength group shows the signal to noise ratio (SNR) for all visible satellites. The satellite number is displayed
below each signal strength meter.
The location, speed, time, and status information is displayed as it is received.
If the GPS is enabled before logging, then the logfile is forced to ”MOVING” platform mode, and five fields (latitude,
longitude, elevation, speed, number of satellites in view) are appended to each record.
32
Unihedron SQM-LU Operator’s Manual -
20170728
Summary of Contents for SQM-LU
Page 2: ......
