Unigas RX92R-FGR, Service Manual

Page: 79 / 125

31
10.2 Address and activate the AUX3 servomotor.
Usually these operations are already set in the manufacturer factory.
They would be necessary in same cases as: the substitution of the servomotor, in case the FGR mode were not activated yet or the LMV5x were be
supplied loose…
WARNING: for LMV52.400 device, in case of FGR servomotor addressing: the only possible choice is AuxActuator3. Don't set
the FGR servomotor for a different one.
1st level 2nd level 3rd level 4th level 5th level 6th level Description
Params & Display
Actuators
Parameter settings for fuel/ air ratio
control
Addressing Parameter settings for firing on Gas
or on Oil
AirActuator
GasActuat
OilActuat
AuxActuator
AuxActuator 2
AuxActuator 3
AuxActuator 3 AuxActuator 3 MUST be chosen
After the addressing, activate the FGR servomotor.
1st level 2nd level 3rd level 4th level 5th level 6th level Description
Params & Display
RatioControl Parameter settings for fuel/ air ratio
control
GasSettings
OilSettings Parameter settings for firing on Gas
or on Oil
AuxActuator deactivated
damper act
VSD active
AUX3
VSD+Aux3
Deactivated for LMV52.xxx
AUX3 for LMV51.300 Deactivated for LMV52.xxx
AUX3 for LMV51.300
AirActuator deactivated
activated
air influen
activated
AuxActuator 1
AuxActuator 2
AuxActuator 3 Activated for LMV52.xxx
VSD
GasActuator
OilActuator Activated
Activated Choice according to the Operation
mode gas setting or oil setting.