Unigas IDEA LG280, Manual Of Installation - Use - Maintenance

Page: 7 / 89

C.I.B. UNIGAS - M039132CD
7
How to interpret the burner’s “Performance curve”
To check if the burner is suitable for the boiler to which it must be installled, the following parameters are needed:
z
furnace input, in kW or kcal/h (kW = kcal/h / 860);
z
backpressure (data are available on the boiler’s ID plate or in the user’s manual).
Example:
Furnace input: kW 600
Backpressure: mbar 4
In the “Performance curve” diagram (Fig. 2), draw a vertical line matching the furnace input value and an horizontal line matching the
backpressure value. The burner is suitable if the intersection point A is inside the performance curve.
Fig. 2
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15°C.
Checking the proper gas train size
To check the proper gas train size, it is necessary to the available gas pressure value upstream the burner’s gas valve. Then subtract
the backpressure. The result is called
p
gas.
Draw a vertical line matching the furnace input value (600kW, in the example), quoted on
the x-axis, as far as intercepitng the network pressure curve, according to the installed gas train (DN65, in the example). From the inter-
ception point, draw an horizontal line as far as matching, on the y-axis, the value of pressure necessary to get the requested furnace
input. This value must be lower or equal to the
p
gas
value, calculated before.
Fig. 3
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15°C.
Campo di lavoro bruciatori
Tipo P60 Mod. M-xx.x.IT.A.0.50 - M-.xx.x.IT.A.0.65
-1
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700 800 900
Potenza kW
Contropressione in camera di
combustione mbar
A
Tipo / Type P60
M-...50 (Multibloc DUNGS MB-DLE 420 B01)
M-...65 (Filtro / Filter DN65+ SIEMENS VGD40.065 +SKP1x+SKP2x)
0
5
10
15
20
25
100 200 300 400 500 600 700 800 900
Potenza / Output (kW)
M
inima pr
essione gas in
rete / M
inimum inlet gas
pr
essur
e
(mbar
)
Rp 2" (50)
DN65