Unigas IDEA LG280, Manual Of Installation - Use - Maintenance

Page: 24 / 89

C.I.B. UNIGAS - M039132CD
24
Burner gasket (NGX400)
To install the burner gasket proceed as shown by the following images.
How to modify the blast tube length (NG/LG350-NG/LG400)
To modify blast tube length please read the following instructions.
1
Remove combustion head (See “Removing the combustion head” - Part III of this user’s guide).
2 Remove the flanged piece T by removing the 4 socket head screws VTF (Fig. 7).
3 Remove the 4 screws which hold the blast tube to the flanged piece (Fig. 8).
4 Extract the blast tube from the flanged piece and assemble it in the other way round as shown in pictures Fig. 9 and Fig. 10. Now
fasten the two pieces using the same screws.
5 Assemble the whole piece to the burner by caring attention to the indication in picture Fig. 12.
Fig. 7
Fig. 8
Fig. 9 - Short blast tube
Fig. 10 - Long blast tube
1
2
3
T
VTF