Unify OpenStage 60 T User Manual Download

Page: 58 / 155

Enhanced phone functions

Placing an external call on hold

If you have programmed a hold key on your phone



page 71, you can put ex-

ternal calls on hold.



Then all other stations can accept the call on the assigned trunk.

Press the "Hold" key.

The message of the relevant trunk appears (e.g. 801) and note the trunk num-
ber.



If available, the LED of the assigned trunk key flashes slowly.

if nec.

Replace the handset or press the key shown.



Depending on the configuration, this may be necessary so other members can
also pick up the call on hold.

Picking up a held call:

Prerequisite:

One or more calls are on hold. The phone is idle.

Open the Program/Service menu



page 36.

Select and confirm the option shown.

If the "Retrieve"



page 71 key is available, press it.

Enter the noted trunk number.

If there is a "Line:" key available for the relevant trunk, this flashes slowly. Press
the key shown.

Held on line: 801

Retrieve line

Summary of Contents for OpenStage 60 T




























































































































































Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands

Unify OpenStage 60 T, User Manual

Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands