Unify OpenStage 60 T User Manual Download Page 143

Page: 143 / 155

Data backup to USB memory stick

143

Restoring selected user data

This operation only overwrites data in "Restore" status with the selected backup.

Prerequisite:

You have selected a backup and opened the context menu



page 142.

Confirm the option shown in the context menu.

The "Restore {1}:" page is displayed.

Select an entry, such as "Phone book":

The phone displays the current setting.



Confirm.

Select and confirm the option shown in the context menu to replace the phone-
book data with the data backup.

Set or check the status for all other options:
• "Call logs" (for call lists)
• "Menu data" (for the user menu, incl. call forwarding)
• "Screensaver images"
• "All clip images"
• "All ringer tones"
• "All midlet data"

Select and confirm the entry "Backup password".

Enter the password set during the backup.

Select and confirm the option shown to start the data transfer.

You can follow the transfer status on the display. A confirmation message ap-
pears in a pop-up window when the transfer operation is complete.

Restore

Ignore

Restore

1. No midlets available yet.

Restore selected

Summary of Contents for OpenStage 60 T




























































































































































Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands

Unify OpenStage 60 T, User Manual

Search results

Summary of Contents for OpenStage 60 T

Reviews:

Related manuals for OpenStage 60 T

Brands by name

Popular brands