Administration
A31003-S2030-M100-11-76A9, 01/2015
178
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
Multiline Appearance/Keyset
Manual line selection overrides automatic line preferences.
Line action mode
determines the consequence for an established connection when the line
key is pressed. If "hold" is selected, the call currently active is set to hold as soon as the line
key is activated. The user has two options: 1) to reconnect to the remote phone by pressing the
line key that corresponds to that call, or 2) to initiate another call from the newly selected line.
If "release" is selected, the previously established call is ended.
If
Show focus
is checked, the LED of a line key flutters when the line is in use. If it is not
checked, the line key is lit steady when it is in use.
The
Reservation timer
sets the period after which the reservation of a line is canceled. A line
is automatically reserved for the keyset whenever the user has selected a line for an outgoing
call and hears a dial tone. The reservation of a line is accomplished by the Phone Administra-
tion server, which notifies all the endpoints sharing this line. If set to 0, the reservation timer is
deactivated.
Forward indication
activates or deactivates the indication of station forwarding, i. e. the for-
warding function of Phone Administration. If
Forward indication
is activated and station for-
warding is active for the corresponding line, the LED of the line key blinks.
Preselect mode
determines the phone’s behaviour when a call is active, and another call is
ringing. If the parameter is set to "Single button", the user can accept the call a single press on
the line key. If it is set to "Preselection", the user must first press the line key to select it and
then press it a second time to accept the call. In both cases, the options for a ringing call are
presented to the user: "Accept", "Reject", "Deflect".
Preselect timer
is relevant if
Preselect mode
is set to "Preselection". The parameter sets the
timeout in seconds for the second key press that is required to accept the call. After the timeout
has expired, the call is no longer available.
When
Bridging enabled
(Admin > Features > Configuration) is activated, the user may join
into an existing call on a shared line by pressing the corresponding line key. On key press, the
Phone Administration builds a server based conference from the existing call parties and the
user. If the call has already been in a server based conference, the user is added to this con-
ference.
>
When bridging shall be used, it is highly recommended to configure the phone for a
system based conference (see Section 3.7.9, “System Based Conference”). This
enables adding more users to a system based conference that has been initiated by
bridging.
