9
Deutsch
English
Fr
ançais
Nederlands
Italiano
Españ
o
l
Po
rtuguês
Installation of the telephone
See also overview on page 2.
Desk Installation
By mounting the stand on the telephone using the long or
short end you can select between 20° and 45° tilt angle:
1. Place the phone upside down on a soft surface and re-
move all cables from the phone except the handset cord
8
.
2. Insert the stand along the L-shaped bars on the base of
the telephone as shown.
3. Slide the stand to the stop at the left until it locks into
place.
4. Plug the U
P0/E
cable into the socket on the bottom of the
phone .
Optional Connections
If desired, you can connect further devices to your phone
(see also overview on page 2):
USB slave for PC connection (1st party CTI)
Connection to Headset
Connection to Key Module
If further settings are required for correct operation of the
telephone, please contact your administrator.
long end: 20°
short end: 45°
A
B
D
E
