Phoning on several lines (multi-line)
159
Witness or tape connection
During a call a previously determined participant can be prompted to enter the
call as a “witness” via a programmed “Request silent monitor” function key. The
third participant in the call is not informed of the connection of the “witness”. The
witness can not participate in the call, only listen in.
Prerequisite:
The witness or tape connection is set up on your system and the
programmed “Request silent monitor” function key is set up on your phone. You
are conducting a call. “Private call” must be deactivated.
Press the “Request silent monitor” function key briefly twice. A special ringtone
sounds on the phone of the “witness” and the message “Witness or tape con-
nection” is shown on your display and that of the “witness”.
^
The “witness” lifts the handset,
or
presses the line/function key on which the call is being carried out.
The “witness” can now listen in to the call unnoticed.
Deactivating
Press the programmed “Ring transfer” function key. The LED goes out. A call is
again signaled on the phone.
Please take note of the applicable data protection regulations for the con-
figuration and use of witness or tape connection.
Request silent monitor
_
Line 1
£
Only the “witness” can end the silent monitoring by hanging up or pressing
the line key.
Ring transfer
¤
Summary of Contents for OpenScape CP700
Page 1: ...OpenScape Desk Phone CP700 CP700 OpenScape 4000 User Guide HFA A31003 C1000 U128 1 7619...
Page 48: ...48 Operating your OpenScape Desk Phone CP700 CP700X...
Page 53: ...Operating your OpenScape Desk Phone CP700 CP700X 53...
Page 71: ...Operating your OpenScape Desk Phone CP700 CP700X 71 Save your new settings...