Unify OpenScape Cordless Enterprise User Manual Download Page 24

Page: 24 / 80

Alarm clock

Alarm clock

Activating/deactivating the alarm clock and setting the wake-up time

When the alarm clock is activated, the icon

and the wake-up time are displayed in idle display.

Alarm

An alarm is shown on the display and indicated by the selected ringtone melody. The alarm sounds for
60 seconds. If no key is pressed, the alarm is repeated after 5 minutes. After the second repetition, the
alarm call is deactivated for 24 hours.

Switching off/repeating the alarm after an interval (snooze mode)

Deactivate the alarm:

OFF

Repeat the alarm (snooze mode): Press

Snooze

or any key . . . the alarm is switched off and repeated

after 5 minutes.

Protection against unwanted calls

Time control for external calls

Enter a time period during which the handset should suspend ringing to
indicate external calls e.g. during the night.

Switch off ringtone when in charging cradle

The handset will not ring when placed in the charging cradle. The call is only indicated on the display.

Date and time have been set.

. . . use

to select

Organizer

Alarm Clock

. . . then

Switch on/off:

Activation

: . . . use

to select

Off

Enter alarm data:

. . . use

to successively select

Time

Occurrence

Volume

and

Melody

. . . use

to set the relevant value

Save

During a call, the alarm is only indicated by a short tone.

Date and time have been set.

. . . use

to select

Audio Settings

Ringtones (Handset)

Time Control

. . . then

Switch on/off:

use

to select

Off

Enter time:

use

to switch between

Suspend

ring. from

and

Suspend ring. until

. . . use

to enter start and end in

4-digit format

Save:

Save

The time control only applies to the handset for which the setting is configured.

The telephone will continue to ring for numbers that have been assigned to a VIP
group in the directory.

. . . use

to select

Audio Settings

Ringtones (Handset)

Silent Charging

Change

(

= ringtone is switched off when in charging cradle)

Time Control

For external calls:

Suspend ring. from:

22:00

Suspend ring. until:

07:00

Back

Save

Example

Summary of Contents for OpenScape Cordless Enterprise

















































































Search results

Summary of Contents for OpenScape Cordless Enterprise

Reviews:

Related manuals for OpenScape Cordless Enterprise

Brands by name

Popular brands

Unify OpenScape Cordless Enterprise, User Manual

Search results

Summary of Contents for OpenScape Cordless Enterprise

Reviews:

Related manuals for OpenScape Cordless Enterprise

Brands by name

Popular brands