manualshive.com logo in svg

Unify OpenScape 600, User Manual

Share
Download
Unify OpenScape 600 User Manual Download Page 112

112

Switch on forwarding to the office

The advantage of a specific key for call forwarding is that you do not have to re-
enter the call forwarding to office mode every time. The programmed key alrea-
dy contains the call forwarding to office mode. You can therefore set up several 
keys with different forwarding destinations.

Press the key if it is set up. The LED is illuminated.

or

Set up call forwarding via the idle menu

@

If nec. Press Main Menu key.

€

Select "Forwarding on".

Confirm. The Functions dialog opens.

Confirm.

or

Confirm.

or

Confirm. A destination is required in the Functions dialog.

j

Enter the destination number.

Confirm.

Switch off call forwarding via the key

Press the key if it is set up. The LED goes out.

or

Switch off call forwarding via the idle menu

@

If nec. Press Main Menu key.

Confirm.

Frwrdng. Office

-

_

Call forwarding to office 

_

1=immediately

_

2=unanswered calls

_

3=if busy

_

save

_

Frwrdng. Office

-

_

Call forwarding to office 

_

Summary of Contents for OpenScape 600










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands